Fixings & Adhesives
Rawlplug Uno Universal Wall Plug (6mm, Jar of 500)
Universal wall plug that works in solid masonry, hollow block, plasterboard and aerated concrete without needing to identify the substrate first.
Rawlplug
TIMCO Nylon Frame Fixings 10.0 x 140mm
Nylon frame fixings for securing door and window frames to masonry, 10 x 140mm, with a 5.5 x 145mm Pozi countersunk screw.
- For fixing door and window frames to masonry
- Supplied with a 5.5 x 145mm Pozi countersunk screw
- Nylon plug with a zinc-finish carbon steel screw
- Countersunk head sits flush with the frame surface
- 10mm drill size, 60mm minimum hole depth
- Fixes through frames up to 90mm thick
Overview
TIMCO nylon frame fixings are used to secure door and window frames into masonry openings. Each fixing is a 10 x 140mm nylon plug with a 5.5 x 145mm Pozi countersunk screw in carbon steel with a zinc finish. Retailer data gives a 10mm drill size, a 60mm minimum hole depth and a 90mm maximum fixture thickness.
In-Depth Look
Frame fixings are used in quantity by window and door installers. The TIMCO nylon frame fixing pairs a long nylon plug with a countersunk screw, so the frame can be fixed through into the masonry behind it.
Installation
Drill through the frame and into the masonry with a 10mm masonry bit. Retailer data gives a 60mm minimum hole depth and a 90mm maximum fixture thickness. Follow TIMCO’s instructions for setting the fixing. The countersunk head sits flush with the frame surface.
Materials
The plug is nylon, and the 5.5 x 145mm Pozi screw is carbon steel with a zinc finish.
Summary
A 10 x 140mm nylon frame fixing with a Pozi countersunk screw for fixing door and window frames to masonry. Check the substrate and fixture thickness against TIMCO’s data before use.
How It Compares
The TIMCO nylon frame fixing is a long plug with a countersunk Pozi screw that passes through the frame and into the wall. This one is 10mm in diameter and 140mm long, with a screw size of 5.5 x 145mm. The screw is carbon steel with a zinc finish. It is for brick, block, stone and concrete, and it is sold in packs of 100 and also in a pack of 20.
You drill a 10mm hole. The minimum hole depth is 60mm, and the maximum frame thickness it can go through is 90mm.
| Option | What it is | What to weigh up |
|---|---|---|
| This frame fixing | A long plug and screw that goes through the frame | Check the drill size and the frame thickness |
| General-purpose wall plug | A shorter plug for general use | A different fixing from a frame fixing |
| Concrete screw | A screw that cuts its own thread in masonry | Check the pack for the hole size |
| Expansion anchor | An anchor that expands in the hole | Check the type and the data sheet |
| Chemical anchor | A resin fixing | A different method |
General-purpose options include the Rawlplug Uno universal wall plug and the Fischer wall plug fixings kit. A concrete screw option is the Thunderbolt masonry concrete anchor, and an expansion anchor option is the TIMCO Shield anchor projecting bolt. Our guides to which screw for which job and choosing fixings and adhesives help with the choice.
Common Questions
What is a frame fixing? It is a long plug with a screw that goes through the frame into the wall.
What drill size do I need? 10mm for this size. Drill to at least 60mm deep, and deeper than the plug if the instructions say so.
How thick a frame can it go through? Up to 90mm for this one. Check the pack for the frame thickness and the fixing length.
Can I use it in hollow block or plasterboard? No. It is for solid masonry and concrete. Check the pack for the base materials listed.
How do I stop the frame bowing when I tighten? Put packers or shims behind the frame at each fixing, and tighten gently. Over-tightening can pull the frame out of line.
Which bit do I need? A Pozi bit that matches the recess in the screw head. Check the pack.
Follow the manufacturer’s instructions.
| Size | 10.0 x 140mm |
|---|---|
| Plug Material | Nylon |
| Screw Material | Carbon steel, zinc finish |
| Head Type | Pozi countersunk |
| Drill Bit Size | 10mm masonry drill bit |
| Substrate | Solid masonry, concrete, brick |
| Screw Size | 5.5 x 145mm |
| Max Fixture Thickness | 90mm |
Who It's For
- Window and door installers fitting frames into masonry openings
- Joiners and carpenters hanging door linings and fixing sub-frames
- Builders fitting security grilles, gates, and other frame-mounted items to masonry walls
Pros & Cons
Pros
- Fixes through the frame into the masonry behind
- Flush countersunk head gives a clean finish
- Nylon plug with a zinc-finish screw
Cons
- Not suitable for hollow or lightweight block without additional support
- Check the substrate before choosing a frame fixing
- Limited adjustment once tightened
Affiliate Disclosure: This page may contain affiliate links. If you purchase a product through one of these links, we may receive a small commission at no additional cost to you. This helps support our research and keeps this site running. Full disclosure.
Buying Guides
Works Well With
Fixings & Adhesives
Fischer DuoPower Wall Plug Assortment Box
Wall plug assortment of 210 Fischer DuoPower plugs in three sizes, in a sorted FIXtainer storage case.
Fischer
Related Products
Fixings & Adhesives
CT1 Unique Sealant and Construction Adhesive 290ml
Hybrid polymer sealant and adhesive that bonds and seals virtually any material. Works on wet surfaces.
CT1
Fixings & Adhesives
DeWalt DT71572 Screwdriver Bit Set (45 Piece)
45-piece screwdriver bit set with Phillips, Pozidriv, Torx and slotted bits in 25mm and 50mm lengths, supplied in a compact case.
DeWalt
Fixings & Adhesives
Everbuild Everflex Weather Mate Gap Filler & Adhesive 295ml
Exterior sealant and adhesive that remains permanently flexible, water resistant, and paintable. Available in clear and other colours.
Everbuild