Croydex Flexi-Fix Chester Towel Rail (Chrome)

In-Depth Look

Fitting accessories to tiled bathroom walls is always a moment of commitment: drill in the wrong position and you have a cracked tile and an unsightly hole to deal with. The Croydex Flexi-Fix system addresses this by separating the positioning step from the permanent fixing step.

Flexi-Fix System

The Flexi-Fix mounting plate uses an adhesive pad to attach to the wall initially, allowing you to confirm the height, level, and spacing are exactly right before committing to drilling. Once the position is confirmed, concealed screws pass through the plate and into the wall via pre-marked drilling points. The adhesive alone provides enough temporary support to check the position with a spirit level and ensure it is visually balanced with adjacent fittings. This two-stage approach prevents the most common cause of DIY bathroom fitting disappointment: fixing at the wrong height or off-level.

Build Quality

Chrome plated brass is a significant step up from the chrome plated plastic used in budget bathroom accessories. Brass does not flex under load, crack in cold temperatures, or yellow with age. Chrome plating on brass has a deeper, more consistent lustre than plating on zinc alloy or plastic substrates, and is more resistant to the surface pitting and peeling that affects cheaper fittings in humid bathroom environments.

Adhesive-Only Installation

For tenants or homeowners who cannot drill into tiles, the adhesive-only fixing option provides a functional installation without wall damage. For the adhesive to hold long-term, the tile surface must be thoroughly degreased before application. A silicone-free surface cleaner followed by a wipe-down with isopropyl alcohol gives the adhesive the best chance of lasting. Standard bathroom use (draping bath towels) is within the adhesive’s capacity; overloading with heavy wet towels is not.

Verdict

The Croydex Flexi-Fix Chester is the towel rail for people who want a quality fitting without risking their tiles. Brass construction, concealed fixings, and the flexible installation system make it the right choice for tiled bathroom walls.

How It Compares

Croydex Chester Flexi-Fix is a range of bathroom accessories in a chrome finish. The range includes a towel ring and a towel rail, among others. Flexi-Fix is the fixing system, and it gives three ways to put an accessory on the wall: stuck on with adhesive, screwed to the wall, or fixed using existing holes. It is for walls and tiles, and the fixing can cover existing holes even when the spacing is different.

An accessory like this holds towels but does not heat them. Check the pack for the item you are buying and the fixing options it offers.

A heated alternative is the Milano chrome heated towel rail. A radiator that can also dry towels is the Hudson Reed Revive designer radiator. Our guides to fitting a bathroom and choosing kitchen and bathroom fittings cover the room as a whole.

Common Questions

What does Flexi-Fix mean? It is a fixing system that lets you glue the accessory on, screw it to the wall, or cover existing holes. Follow the pack for the method you choose.

Can I fit it to tiles? Flexi-Fix is for walls and tiles. The pack describes the fixing options, so follow them for your wall.

How do I mark the position? Hold the accessory against the wall, check it with a level and mark with a pencil. Keep it clear of doors and of anything that opens.

How much weight can it hold? Check the pack for the maker’s guidance. It depends on the fixing method and the wall.

How do I clean chrome? Use a soft damp cloth and dry it afterwards. Avoid abrasive pads, which can scratch the finish.

Does it replace a heated rail? No. It holds towels and does not heat.