JSP EVO2 Vented Safety Helmet White
EN 397 certified vented safety helmet with slip ratchet adjustment.
JSP
Lightweight frameless safety spectacles with clear anti-fog lens and EN 166 certification.
The Uvex Pheos are frameless, metal-free safety spectacles with a clear anti-fog lens and soft, non-slip ear pieces.
Safety spectacles that fog up get removed. That is the central compliance problem with eye protection on building sites. The Uvex Pheos addresses it with an anti-fog coating on the inside of the lens.
The supravision excellence anti-fog coating is applied to the inner lens surface, where condensation forms when warm, humid air contacts cold lenses. The coating prevents the surface energy differential that causes water droplets to form: moisture spreads into a thin transparent film rather than condensing into opaque droplets. For tradespeople moving between cold and warm environments (from a cold van into a heated building, or from outdoors into a heated plant room), this is particularly valuable.
The Pheos is certified to EN 166, the European standard for eye protection. The markings on the lens and frame show the optical class, the impact rating and any extra features, so check the markings on your pair to confirm exactly what it is rated for. Optical class 1 is the best optical class, suitable for continuous wear. F means low energy impact protection at 45 m/s, and T means the impact rating holds at extreme temperatures (-5°C to +55°C) when combined with F. Grinding and heavier cutting often need goggles or a face shield, so check the task risk assessment.
At about 30g, the Pheos is light to wear. Uvex describes the design as well ventilated, which helps reduce fogging, and the soft, non-slip ear pieces help it stay in place.
The Uvex Pheos combines EN 166 certification, a UV400 lens and an inner anti-fog coating in a light, frameless design. Choose eye protection to match the task and your risk assessment.
The Uvex Pheos is a pair of frameless safety spectacles with a clear polycarbonate lens. Its supravision excellence coating gives an anti-fog finish on the inside and scratch resistance on the outside, and the lens blocks UV up to 400nm (UV400). The spectacles weigh about 30g (retailers list 28 to 30g), are metal-free and have soft, non-slip ear pieces.
The markings tell you what the glasses are made to do. The lens and frame both carry EN 166 markings, so check the markings on the lens and frame of your pair to confirm exactly what it is rated for. The table below explains symbols you may see on safety spectacle lenses.
| Symbol | Meaning |
|---|---|
| 2C-1.2 | UV filter marking (EN 170): 2C is a UV filter with good colour recognition, and 1.2 is the scale number |
| Maker’s letter or logo | Manufacturer identification mark |
| 1 | Optical class 1, for continuous wear |
| F | Low energy impact at 45 m/s |
| T | The impact rating holds at extreme temperatures when combined with F |
| K | Scratch resistant |
| N | Anti-fog |
The frame carries its own marking, usually the manufacturer mark, the standard (EN 166) and its impact rating.
Spectacles do not seal around the eyes. Other eye protection does different jobs.
| Type | Best suited to |
|---|---|
| Safety spectacles like this one | General site work, light cutting, drilling |
| Goggles | A full seal around the eyes against dust and splashes |
| Face shield | Grinding, heavier cutting and other higher-risk tasks |
| 3M and Bolle spectacles | Other makers with their own markings, so compare each one |
| Tinted spectacles | Bright outdoor light |
Always choose eye protection to match the task and your risk assessment.
Fit matters as much as the markings. Safety glasses only protect if they sit properly on the face and are worn all the time you are exposed to the hazard. The Pheos is light at about 30g and has soft, non-slip ear pieces, which matters if you wear them for long periods. Check that they fit comfortably under any hard hat or ear defenders you use. The employer’s risk assessment sets the level of protection required.
What does the EN 166 marking on my glasses mean? EN 166 is the European standard for personal eye protection. The letters and numbers on the lens and frame tell you the optical class, the type of impact protection, and extra features such as anti-fog and scratch resistance. The table above explains the common symbols, and the markings on your own pair confirm what it is rated for.
When do I need goggles or a face shield instead of spectacles? Use goggles where dust or splashes could reach the eye from the side, and a face shield for grinding, cutting and chemicals. Your site’s risk assessment decides what you need, so follow it.
Why do safety glasses fog, and how does an inner anti-fog coating help? Glasses fog when warm, damp air from your face meets a cooler lens and condenses. An anti-fog coating on the inside spreads that moisture so it is harder for droplets to form. Fogging can still happen in some conditions, so take a break if your view becomes unclear.
How do I clean and look after them? Rinse off grit with clean water, then wipe with a soft cloth. Dry wiping a dusty lens can scratch it. Store them in a case or pouch, and replace them if the lens is scratched or damaged, as that can weaken the protection.
| Lens Type | Clear, anti-fog |
|---|---|
| UV Protection | UV400 |
| Standard | EN 166 (check the lens markings for the full rating) |
| Weight | About 30g |
EN 397 certified vented safety helmet with slip ratchet adjustment.
JSP
33dB SNR hi-viz ear defenders with slim cup design and padded headband for hearing protection when using loud power tools.
3M
33dB SNR hi-viz ear defenders with slim cup design and padded headband for hearing protection when using loud power tools.
3M
22-inch coarse cut handsaw with XT toothing and 2-component ergonomic handle for efficient carpentry and general site cutting.
Bahco
Green cross-line laser level with 15m range and LB 10 mount, offering up to four times the visibility of red lasers for interior fit-out work.
Bosch