Gorilla Wood Glue 1 Litre

In-Depth Look

Gorilla Wood Glue is a water-based wood glue for general joinery and carpentry. It cleans up with water before it cures and can be sanded once dry.

Water Resistance Class

The UK product is classed D3 under EN 204, a test standard for wood glues. D3 means the bond has been tested for water resistance, so it suits joints that may get damp. It is not fully waterproof, so it is not the right choice for joints that stay wet or sit in water. For those, choose an adhesive rated for that use.

Working Time and Clamping

Clamp joints for 20 to 30 minutes at room temperature, then allow about 24 hours for a full cure. Wipe off any squeeze-out before it dries, as dried glue on the surface can resist stain.

Summary

A water-based D3 wood glue for indoor joinery and joints that may get damp, with a 20 to 30 minute clamp time and water clean-up.

How It Compares

Gorilla Wood Glue comes in a 1 litre bottle and is for wood. The listing describes it as suitable for indoor and outdoor use, and it can be sanded once dry. The maker’s data sheet and retailers class it as D3 water resistant under EN 204. Clamp the joint for 20 to 30 minutes, then allow 24 hours for a full cure.

D3 is a grade from a wood-glue test standard. It tells you the bond has been tested for water resistance, so read the label for where the glue can be used. It is not a promise that a joint can sit underwater.

For a wider view of adhesives, see our guide on choosing fixings and adhesives.

Common Questions

What does D3 water resistance mean? D3 is a water resistance class under EN 204, the European standard for wood glue joints. It shows the glue has been tested for water resistance. Read the label for where it can be used. It does not mean a joint can be submerged.

How long should I clamp wood glued with Gorilla Wood Glue? Clamp for 20 to 30 minutes. After that, leave the joint for 24 hours for a full cure before it takes heavy use.

Do I need to clamp every joint? Clamping holds the surfaces together while the glue sets. A tight fit and even pressure across the joint help. Where a clamp will not reach, hold the pieces in position another way until the clamp time has passed.

Can I stain or paint over wood glue? Glue left on the surface can resist stain, so wipe off squeeze-out before it dries. The glue can be sanded once dry. Check the label before you paint or decorate over it.

Can I use it outside? The listing describes it as suitable for indoor and outdoor use. Read the label and keep joints protected from the weather.

Follow the instructions on the bottle.