Plumbing & Heating
John Guest Speedfit 15mm Equal Elbow PEM0315W
Push-fit 15mm equal elbow fitting for copper and plastic pipe, requiring no solder, flux or flame. Suitable for hot and cold water and central heating systems.
John Guest Speedfit
Yorkshire Tectite Sprint 15mm Push-Fit Coupling
Push-fit straight coupling for 15mm pipe, with no flux or solder needed. WRAS approved. Not demountable, so treat joints as permanent.
- Push-fit connection for 15mm pipe, no flux or solder required
- WRAS approved for potable water applications
- Not demountable, so joints should be treated as permanent
- Pipe must be cut square and deburred before fitting
- Suitable for hot and cold water and central heating systems
- Part of the Tectite Sprint push-fit range
Overview
The Yorkshire Tectite Sprint is a push-fit straight coupling for 15mm pipe. It is used on copper, and the range also takes plastic pipe when liners are fitted. Joints are made without soldering or flux, though the pipe must be cut square and deburred first. Suppliers describe Tectite Sprint fittings as not demountable, so treat a finished joint as permanent.
In-Depth Look
Yorkshire is a long-standing name in UK copper fittings, including solder ring fittings. The Tectite Sprint range offers a push-fit alternative for situations where soldering is impractical or unwanted.
Pipe and Preparation
The coupling takes 15mm copper pipe, and the range also takes plastic pipe when the correct liners are fitted. Cut the pipe square and deburr it before pushing it into the fitting. A pipe cutter and deburring tool are still needed, even though no flux or solder is used.
Not Demountable
Supplier data describes Tectite Sprint fittings as not demountable. Treat a finished joint as permanent. Pegler sells a separate disconnecting tool for some sizes; use it only where the maker says so.
When to Use Push-Fit Over Solder
Push-fit fittings suit work in occupied properties where flame-free installation is preferred, and confined spaces where a blowtorch cannot be used safely. For large new installations, many plumbers still prefer to solder.
Summary
A 15mm push-fit straight coupling from the Tectite Sprint range, WRAS approved, for copper pipe and plastic pipe with liners. Joints are permanent, so position the fitting carefully before pushing the pipe home.
How It Compares
The Yorkshire Tectite Sprint is a push-fit coupling. The Tectite Sprint fittings are copper or machined DZR brass, and the sizes cover 15mm and 22mm, among others. They are for copper tube, and plastic pipe is used with liners. They are listed for hot and cold water services, heating and chilled water, and they are WRAS approved.
The fittings are described as not demountable, so a joint is permanent. Pegler sells a separate disconnecting tool for some sizes.
| Option | What it is | What to weigh up |
|---|---|---|
| This coupling | Push-fit, copper or DZR brass | The joint is permanent |
| Solder-ring coupling | A joint formed with heat and solder | Needs a flame and solder |
| Compression coupling | A joint tightened with a nut and olive | Needs spanners |
| Other push-fit brands | Push-fit fittings from other ranges | Check each maker’s instructions |
A push-fit elbow from another brand is the Speedfit 15mm push-fit elbow. For cutting the pipe square, see the Rothenberger PipeSlice 15mm copper pipe cutter. Our guides to copper versus plastic pipe and tools for plumbers have more detail.
Common Questions
Can a Tectite Sprint coupling be taken apart? The fittings are described as not demountable. Treat the joint as permanent. Use the maker’s disconnecting tool only where the maker says so.
What pipes does it fit? Copper tube, and plastic pipe with the correct liners, as the maker’s instructions set out. Check the pack for the pipe size.
How do I prepare the pipe? Cut it square, remove any burrs, mark the insertion depth and push the pipe to the mark. Follow the instructions.
Can it carry drinking water? The range is WRAS approved. Check the pack for the water use you have in mind.
Can I use it on central heating? The range is described as suitable for heating. Check the pack.
Plumbing work should be done by a competent person if you are unsure. Follow the manufacturer’s instructions.
| Size | 15mm straight coupling |
|---|---|
| Pipe Compatibility | 15mm copper, or plastic pipe with liners |
| Approval | WRAS approved |
| Connection Type | Push-fit |
Who It's For
- Plumbers and heating engineers wanting fast joints on copper pipework
- DIY homeowners making plumbing repairs without soldering equipment
- Commercial maintenance teams needing quick pipe connections
Pros & Cons
Pros
- No soldering or flux needed
- Flame-free joints for occupied properties
- WRAS approved for drinking water applications
- Takes copper, and plastic pipe when liners are fitted
Cons
- Not demountable, so joints are permanent
- Plastic pipe needs liners fitted
- Pipe must be cut square and deburred for a sound seal
Affiliate Disclosure: This page may contain affiliate links. If you purchase a product through one of these links, we may receive a small commission at no additional cost to you. This helps support our research and keeps this site running. Full disclosure.
Buying Guides
Works Well With
Plumbing & Heating
Rothenberger 88801 Pipeslice 15mm Copper Pipe Cutter
Compact single-handed copper pipe cutter for 15mm tube, which clamps and aligns itself on the pipe for cuts in tight spaces.
Rothenberger
Related Products
Plumbing & Heating
ADEY MagnaClean Professional2 22mm Magnetic Filter
The UK's best-selling central heating magnetic filter, capturing magnetite sludge to protect boilers, pumps and valves.
ADEY
Plumbing & Heating
Arctic Hayes 30mbar U-Flex Manometer Gauge
U-tube manometer for gas tightness testing with flexible design and 12-inch length, essential equipment for Gas Safe registered engineers.
Arctic Hayes
Plumbing & Heating
Drayton TRV4 Thermostatic Radiator Valve Head
Thermostatic radiator valve head only (no valve body), with a liquid sensor, 0 to 5 settings with frost protection and an M30 x 1.5mm thread.
Drayton